What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?
Last Updated: 18.06.2025 07:34

This is an electronic circuit designed to clamp voltages so that the Voltage Potential that appears at the outlet is never going to exceed the nominal value.
the problem then depends on "how fast does the fuse operate?".
eight
How do I explain to my husband that my 19-year-old son has accidentally gotten me pregnant?
The MOV will conduct when the voltage exceeds 50% of line voltage.
So, it’s possible that these devices from Trip Lite have addition suppression devices, these ones seem to be sturdy.
These devices are installed between the “hot” and “neutral” and protective ground.
What toxic behavior has been normalized by society?
Lightning arrestor is a spark-gap device, and can be installed anywhere. What is important, is that the wire is thick enough to withstand the lightning bolt and conduct the energy away from the building.
so, the loop of wire then, when put together with another loop reduces the ‘noise’ on a power line.
And this is the problem alone. Is the power supply in the equipmemt designed with a lightning strike in mind? Some yes, others, no.
What sexual fantasies do you have?
so, what happens?
So, the voltage could go up to 500 volts, and the fuse will not open up.
2024–10–11 [Victor Olarewsju Victor Olarewaju ]
Here is a simplified AC power diagram.
Fuses, on their own, then operate much slower than the MOV variable resistance, during the lightning strike.
For this case there are devices called Metal oxide varistors (MOV).
Would you date/marry a guy younger than you? If no, why not?
[old diagram got deleted by accident]
This one hit behind the barn.
Can the fuse protect the electronic devices from lightning instead of a surge protector.
What should I do to stop being angered easily?
What is lightning?
This is a photo where a lightning bolt took out a home's complete mains distribution box, and a lot of electronic gear as well.
There are two important concepts here.
Is TikTok becoming a platform for soft porn?
Because the load is inductive, the current lags the voltage.(by a bit).
P = e* I, so since I is 16 amps, then the voltage dropped is 1/16 volt or 0.0650 volts.
This is where the MOV conducts again, and dissipated the energy.
When the current is 200% of the rated value , it will “go open” (the link metal melts) and protect the device.
a photo is worth a thousand words.
First Sentence:
Was Daenerys' downfall inevitable after she left Meereen in Game of Thrones?
OK, this is Mohan Rajaratnam’s definition of a Surge suppressor.
Edit 2024–10.
At the secondary, it is 1000 times less.)turns ratio). If it gets hit with a 100,000 volt bolt of lightning then the voltage arrestors conduct and clamp the voltage down to line voltage, ( but a small amount leaks down the line). This is the problem.
Did Obito ever fully redeem himself in everyone's eyes?
He then asserts :
[image of Common-mode choke]
(Dc diagram shown, AC is similar).
2024–10–16 [ OO OLAOYE OYEBODE ]
He then describes the function of a fuse.
Once the voltage goes over 0.0650 volts, then this fact can be used to amplify the difference, and turn the circuit breaker off , furthur down the line. Essentially that is what a RCD/GFCI does, it compares the incoming current, to the outgoing current, and if the difference between the two currents is over 5mA, then it trips the circuit breaker.
It’s been three xxx five werks, and there has been no response to my follow on query on his Commment to my answer.
But during the surge, the fuse will not blow if it is a longer duration and lower value )10 to 50%).
2024–09–27 [ Mohan Rajaratnam Mohan Rajaratnam ] . Thinks you can get free electricity from nothing : Mohan Rajaratnam's answer to Is it possible to generate free electricity at home using a magnet or other low-cost methods? If so, how does it work?
It also is a device that limits the change in current flow.
“ A fuse is a device which protects the (circuit) against overload and short circuit.”
Now when you have a certain ac resistance, then a current flows in a loop.
So combined with a device called a MOV or Metal-oxide-resistor, then forms the 3rd part of a “surge suppressor “.
At one ohm, the resistor has a maximum of 1 watt power.
One is “what exactly is in a ‘surge protector’ ? ”
I post the exact comment here.
Upvotes:
These are simplified answers to the original question, and does not change anything I wrote above.
2024–10–10[John johnson John Johnson ]
If the nominal power is 4,000 watts then the current at 230volts is 16 amps.
Would individual surge supressors have save this equipment? most likely, since the surge supressor would take the jolt instead of the electronic components.
But… the neutral is now “floating” because of the 1 ohm resistance.
At least they know the answer if they wanted it.
The third is lightning and “how it gets conducted into a home.”
what exactly is a ‘surge’ protector?
But it can get overloaded, and no longer works.
but this device (an Inductor) … impedes the rapid changes in the current.
(There is no concept of polarity, in the loop because the current changes direction 100 to 120 times a second (power frequency).
It seems Mohan does not understand the difference between a comment and an Answer.
There are three different concepts here that are getting confused.
This is where this question deviates from being a 'generic' question, and becomes more specific.
This device then solves the entire problem.
This is a high voltage low current spike that comes down the line because of the power poles being struck, and the voltage suppressors activating on the primary side of the transformer.
A fuse is a non-resetable over current circuit protector.
This is 'the assistant's answer'
but I think this circuit , shows a few more pieces.
What does a fuse do?
Is the question then , "why buy a surge supressor, if the fuse alone protects the electronic circuits from a lightning bolt?".
The bolt then partially travels down the line to your home.
There is no harm in having the surge suppressor along with the fuse in the circuit. The fuse will not open up until the current melts the link. This will take time, and in the interim, that jolt will get transmitted into the power supplies.
An AC voltage/ current source, and an ac inductive load.
The other is “what does a “fuse” do?”
“ … to protect building, lightning arrestor, is provided above building and directly connected to earth.”
He then describes Rainy Season and Lightning.
2024–10–11 [Bobby Sanchez Bobby Sanchez ].
2024–10–00 [ Ammar Mahdi ] Ammar Mahdi
Mohan forgets that a fuse is a one-time device, and needs to be replaced if it is tripped.
nine
2024–10–14 [Omar Gharbi Omar Gharbi ]
Barnstars:
In schematic diagrams this is the symbol for a fuse:
One
A circuit breaker is similar, but is resettable.
“ A surge suppressor is the one which is connected at the input supply so that when there is a sudden change voltage it bypasses thereby protecting the (circuit) and electronic components”
This is the picture of an electronic coil of wire wound around a core of magnetic material.